Both the communication and power distribution industries are largely dependent on cable management as because the wires that are used for distributing power and other purposes need to be interweaved and extended in a manner so that fire outbreaks and other hazards do not occur. Cable tray plays a pivotal role in both the industries. These trays are used for channelizing the wires in the intended manner and the trays and other accessories are considered indispensable across various industries including construction industry. Similarly, cable ducts accessories are highly important for cable jetting and other purposes. This article discusses about different types of cable trays.

Stepladder tray

Stepladder systems are mostly used in the power distribution industry. This type of cable ducts accessories come with steps and these trays secure the cable in an effective manner. These cables are installed by the skilled experts both with and sans covers. If you do not require a cover, air is allowed to come inside and the heat is easily ventilated through the open space. One of the many advantages of this type of tray is that the moisture does not develop inside and the wires get enough exposure to light and air.

Channel tray

Channel or trough tray is generally used for supporting relatively short wires, typically 5 to 12 ft long. These trays support the cables that produce very low amount of heat and these trays allow a little amount of ventilation for these cables. Trough cable tray is able to provide the required support at the interval of four inches. These trays are made of both metal and other materials.

Single rail

These are easily installable cable ducts accessories that are available in both one and multiple tiers. These are typically 10 to 12 feet long and the cable can be easily passed through this type of system. These are typically used for channelizing low voltage wire systems and moderate voltage power cable.

Solid tray

The solid bottom cable tray is used in highly sensitive circuits and these are highly secure type of trays. However, many technicians have opined in the past that this type of trays develops moisture too easily and the adequate ventilation system is not there. These cable trays are made of steel or fiberglass.

Wire basket

This type of cable tray is particularly used in the telecommunications industry and is appropriate for the fiber optic wires and low voltage wires. This type of tray is made of steel and comes with zinc plated. Four feet to eight feet long cables can be easily channelized through this type of wire tray.

Depending on your requirement, you should choose from the above mentioned categories. As previously mentioned, different types of wire trays serve different purposes. If you are on a lookout for good quality wire trays, you should look up online. Many manufacturers of cable ducts accessories who are based in Eastern India have started operating through their business websites. If you search online a little bit, you can easily find the manufacturer and dealer websites.